diff --git a/README.md b/README.md index 9249b06..1515c7e 100644 --- a/README.md +++ b/README.md @@ -75,6 +75,16 @@ ClawPanel 是 [OpenClaw](https://github.com/1186258278/OpenClawChineseTranslatio | DEB | `ClawPanel_x.x.x_amd64.deb` | Debian / Ubuntu：`sudo dpkg -i *.deb` | | RPM | `ClawPanel-x.x.x-1.x86_64.rpm` | Fedora / RHEL：`sudo rpm -i *.rpm` | +### Linux 服务器（无 GUI） + +不需要桌面环境，一键命令部署 OpenClaw Gateway，通过端口远程访问： + +```bash +curl -fsSL https://raw.githubusercontent.com/qingchencloud/clawpanel/main/scripts/linux-deploy.sh | bash +``` + +📖 详细教程见 [Linux 服务器部署指南](docs/linux-deploy.md) + ## 功能特性

diff --git a/docs/linux-deploy.md b/docs/linux-deploy.md new file mode 100644 index 0000000..ff47be1 --- /dev/null +++ b/docs/linux-deploy.md @@ -0,0 +1,636 @@ +# Linux 服务器部署指南 + +本文介绍如何在 Linux 服务器上部署 OpenClaw，从零到跑通只需 5 分钟。 + +适用场景：云服务器、NAS、家庭 HomeLab、无 GUI 的 Linux 主机。 + +## 目录 + +- [一键部署](#一键部署) +- [分步安装](#分步安装) +- [配置模型](#配置模型) +- [启动 Gateway](#启动-gateway) +- [开机自启](#开机自启) +- [远程管理](#远程管理) +- [反向代理](#反向代理) +- [常见问题](#常见问题) + +--- + +## 一键部署 + +复制以下命令到终端，一键完成 Node.js + OpenClaw 安装、配置、启动： + +```bash +curl -fsSL https://raw.githubusercontent.com/qingchencloud/clawpanel/main/scripts/linux-deploy.sh | bash +``` + +> 脚本会自动检测系统环境，安装 Node.js（如未安装），安装 OpenClaw 汉化版，配置默认参数，启动 Gateway。 + +不想用一键脚本？往下看分步安装。 + +--- + +## 分步安装 + +### 1. 安装 Node.js + +OpenClaw 需要 Node.js >= 18。选择适合你的安装方式： + +**方式一：包管理器（推荐）** + +```bash +# Ubuntu / Debian +curl -fsSL https://deb.nodesource.com/setup_22.x | sudo -E bash - +sudo apt-get install -y nodejs + +# CentOS / RHEL / Fedora +curl -fsSL https://rpm.nodesource.com/setup_22.x | sudo bash - +sudo yum install -y nodejs + +# Alpine +apk add nodejs npm +``` + +**方式二：nvm（多版本管理）** + +```bash +curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.40.3/install.sh | bash +source ~/.bashrc +nvm install 22 +``` + +验证安装： + +```bash +node -v # 应显示 v18+ 版本号 +npm -v # 应显示 npm 版本号 +``` + +### 2. 安装 OpenClaw + +```bash +# 使用淘宝镜像源（国内服务器推荐） +npm install -g @qingchencloud/openclaw-zh --registry https://registry.npmmirror.com + +# 或使用官方源 +npm install -g @qingchencloud/openclaw-zh +``` + +验证安装： + +```bash +openclaw --version +``` + +### 3. 初始化配置 + +```bash +# 创建配置目录 +mkdir -p ~/.openclaw + +# 写入基础配置 +cat > ~/.openclaw/openclaw.json << 'EOF' +{ + "mode": "local", + "tools": { + "profile": "full", + "sessions": { + "visibility": "all" + } + }, + "gateway": { + "port": 18789, + "bind": "lan", + "auth": {} + }, + "models": { + "providers": {} + } +} +EOF +``` + +**配置说明：** + +| 字段 | 值 | 说明 | +|------|------|------| +| `mode` | `"local"` | 运行模式，必须设置 | +| `tools.profile` | `"full"` | Agent 工具权限，`full` 为全部开启 | +| `gateway.port` | `18789` | Gateway 监听端口 | +| `gateway.bind` | `"lan"` | `"loopback"` 仅本机 / `"lan"` 局域网可访问 | +| `gateway.auth` | `{}` | 认证配置，生产环境建议设置 Token | + +**设置访问密钥（推荐）：** + +如果你的服务器有公网 IP 或局域网内有其他设备访问，强烈建议设置 Token： + +```bash +# 用 jq 修改（需安装 jq） +jq '.gateway.auth = {"mode": "token", "token": "你的密钥"}' ~/.openclaw/openclaw.json > /tmp/oc.json && mv /tmp/oc.json ~/.openclaw/openclaw.json + +# 或直接编辑 +nano ~/.openclaw/openclaw.json +``` + +--- + +## 配置模型 + +OpenClaw 需要至少一个 AI 模型才能使用。编辑 `~/.openclaw/openclaw.json`，在 `models.providers` 中添加服务商： + +### 示例：添加 OpenAI 兼容服务商 + +```bash +cat > /tmp/add-provider.py << 'PYEOF' +import json, sys +config_path = f"{sys.path[0]}/../.openclaw/openclaw.json".replace(sys.path[0] + "/../", "") +import os +config_path = os.path.expanduser("~/.openclaw/openclaw.json") +with open(config_path) as f: + config = json.load(f) + +# 修改为你的实际服务商信息 +provider_id = "my-provider" +config["models"]["providers"][provider_id] = { + "baseUrl": "https://api.openai.com/v1", + "apiKey": "sk-xxxx", + "models": [ + {"id": "gpt-4o", "name": "GPT-4o"}, + {"id": "gpt-4o-mini", "name": "GPT-4o Mini"} + ] +} + +# 设置默认模型 +config.setdefault("agents", {}).setdefault("defaults", {})["model"] = { + "primary": f"{provider_id}/gpt-4o" +} + +with open(config_path, "w") as f: + json.dump(config, f, indent=2, ensure_ascii=False) + +print(f"✅ 已添加服务商 {provider_id}") +PYEOF +python3 /tmp/add-provider.py +``` + +**或者直接编辑 JSON（更直观）：** + +```bash +nano ~/.openclaw/openclaw.json +``` + +在 `models.providers` 中加入： + +```json +{ + "models": { + "providers": { + "my-provider": { + "baseUrl": "https://api.openai.com/v1", + "apiKey": "sk-xxxx", + "models": [ + { "id": "gpt-4o", "name": "GPT-4o" }, + { "id": "gpt-4o-mini", "name": "GPT-4o Mini" } + ] + } + } + } +} +``` + +> 支持任何 OpenAI 兼容 API（DeepSeek、通义千问、智谱、Ollama 等），只需修改 `baseUrl` 和 `apiKey`。 + +--- + +## 启动 Gateway + +### 前台运行（调试用） + +```bash +openclaw gateway start +``` + +看到类似输出说明启动成功： + +``` +Gateway listening on http://0.0.0.0:18789 +``` + +按 `Ctrl+C` 停止。 + +### 后台运行 + +```bash +# 使用 nohup +nohup openclaw gateway start > ~/.openclaw/gateway.log 2>&1 & +echo $! > ~/.openclaw/gateway.pid + +# 查看日志 +tail -f ~/.openclaw/gateway.log + +# 停止 +kill $(cat ~/.openclaw/gateway.pid) +``` + +### 验证运行 + +```bash +# 检查端口是否在监听 +ss -tlnp | grep 18789 + +# 测试 API 响应 +curl http://localhost:18789/health + +# 从其他机器测试（替换为服务器 IP） +curl http://你的服务器IP:18789/health +``` + +--- + +## 开机自启 + +### 方式一：systemd（推荐） + +```bash +sudo tee /etc/systemd/system/openclaw.service << EOF +[Unit] +Description=OpenClaw Gateway +After=network.target + +[Service] +Type=simple +User=$USER +Environment=PATH=$(dirname $(which node)):$PATH +ExecStart=$(which openclaw) gateway start +Restart=on-failure +RestartSec=5 +WorkingDirectory=$HOME + +[Install] +WantedBy=multi-user.target +EOF + +# 启用并启动 +sudo systemctl daemon-reload +sudo systemctl enable openclaw +sudo systemctl start openclaw + +# 查看状态 +sudo systemctl status openclaw + +# 查看日志 +journalctl -u openclaw -f +``` + +**常用命令：** + +```bash +sudo systemctl start openclaw # 启动 +sudo systemctl stop openclaw # 停止 +sudo systemctl restart openclaw # 重启 +sudo systemctl status openclaw # 查看状态 +journalctl -u openclaw -f # 实时日志 +``` + +### 方式二：PM2 + +```bash +# 安装 PM2 +npm install -g pm2 + +# 启动 +pm2 start "openclaw gateway start" --name openclaw + +# 设置开机自启 +pm2 save +pm2 startup + +# 常用命令 +pm2 status # 查看状态 +pm2 logs openclaw # 查看日志 +pm2 restart openclaw +pm2 stop openclaw +``` + +### 方式三：Docker（适合隔离部署） + +```bash +docker run -d \ + --name openclaw \ + --restart unless-stopped \ + -p 18789:18789 \ + -v ~/.openclaw:/root/.openclaw \ + node:22-slim \ + sh -c "npm install -g @qingchencloud/openclaw-zh --registry https://registry.npmmirror.com && openclaw gateway start" +``` + +--- + +## 远程管理 + +Gateway 启动后，你可以通过以下方式管理： + +### 方式一：ClawPanel 桌面端远程连接 + +在你的 Windows/Mac 电脑上安装 [ClawPanel](https://github.com/qingchencloud/clawpanel/releases/latest)，打开后在 Gateway 配置页选择「云端模式」，填入服务器地址即可远程管理。 + +### 方式二：ClawApp 移动端 + +用手机上的 [ClawApp](https://github.com/qingchencloud/clawapp) 连接 Gateway 地址，随时随地与 AI 对话。 + +### 方式三：API 直接调用 + +Gateway 兼容 OpenAI API 格式，任何支持 OpenAI API 的客户端都可以直连： + +```bash +# 对话测试 +curl http://你的服务器IP:18789/v1/chat/completions \ + -H "Content-Type: application/json" \ + -H "Authorization: Bearer 你的Token" \ + -d '{ + "model": "gpt-4o", + "messages": [{"role": "user", "content": "你好"}] + }' +``` + +**在第三方客户端中使用：** + +| 设置项 | 值 | +|--------|------| +| API Base URL | `http://服务器IP:18789/v1` | +| API Key | 你在 `gateway.auth.token` 中设置的密钥 | +| Model | 你配置的模型 ID（如 `gpt-4o`） | + +支持 Cherry Studio、ChatBox、LobeChat、BotGem 等所有兼容 OpenAI API 的客户端。 + +--- + +## 反向代理 + +生产环境建议用 Nginx 反向代理，加上 HTTPS。 + +### Nginx 配置 + +```nginx +server { + listen 443 ssl http2; + server_name ai.example.com; + + ssl_certificate /etc/ssl/certs/ai.example.com.pem; + ssl_certificate_key /etc/ssl/private/ai.example.com.key; + + location / { + proxy_pass http://127.0.0.1:18789; + proxy_set_header Host $host; + proxy_set_header X-Real-IP $remote_addr; + proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; + proxy_set_header X-Forwarded-Proto $scheme; + + # WebSocket 支持（聊天流式响应需要） + proxy_http_version 1.1; + proxy_set_header Upgrade $http_upgrade; + proxy_set_header Connection "upgrade"; + proxy_read_timeout 86400; + } +} +``` + +```bash +sudo nginx -t && sudo systemctl reload nginx +``` + +配置完成后，用 `https://ai.example.com` 替代 IP + 端口访问。 + +### Cloudflare Tunnel（无需公网 IP） + +如果你的服务器没有公网 IP，可以用 [cftunnel](https://github.com/qingchencloud/cftunnel) 一键穿透： + +```bash +# 安装 cftunnel +npm install -g cftunnel + +# 创建隧道 +cftunnel create --name my-ai --hostname ai.example.com --url http://localhost:18789 + +# 启动 +cftunnel start +``` + +--- + +## 防火墙 + +如果需要外部访问，记得开放端口： + +```bash +# UFW（Ubuntu） +sudo ufw allow 18789/tcp + +# firewalld（CentOS / Fedora） +sudo firewall-cmd --permanent --add-port=18789/tcp +sudo firewall-cmd --reload + +# iptables +sudo iptables -A INPUT -p tcp --dport 18789 -j ACCEPT +``` + +> 如果使用了 Nginx 反向代理，只需开放 80/443 端口，不需要开放 18789。 + +--- + +## 升级 + +```bash +# 升级 OpenClaw +npm install -g @qingchencloud/openclaw-zh --registry https://registry.npmmirror.com + +# 重启服务 +sudo systemctl restart openclaw +# 或 +pm2 restart openclaw +``` + +--- + +## 常见问题 + +### npm install 报错 EACCES（权限不足） + +```bash +# 方式一：修复 npm 全局目录权限 +mkdir -p ~/.npm-global +npm config set prefix '~/.npm-global' +echo 'export PATH=~/.npm-global/bin:$PATH' >> ~/.bashrc +source ~/.bashrc + +# 然后重新安装 +npm install -g @qingchencloud/openclaw-zh +``` + +### Gateway 启动后外部无法访问 + +1. 检查 `gateway.bind` 是否为 `"lan"`（不要用 `"loopback"`） +2. 检查防火墙是否放行了端口 +3. 云服务器检查安全组规则是否开放端口 + +```bash +# 验证监听地址 +ss -tlnp | grep 18789 +# 应显示 0.0.0.0:18789，而不是 127.0.0.1:18789 +``` + +### 端口被占用 + +```bash +# 查看谁占了端口 +sudo lsof -i :18789 + +# 改用其他端口 +jq '.gateway.port = 18790' ~/.openclaw/openclaw.json > /tmp/oc.json && mv /tmp/oc.json ~/.openclaw/openclaw.json +``` + +### Node.js 版本太低 + +```bash +node -v +# 如果低于 v18，需要升级 + +# 使用 nvm 升级 +nvm install 22 +nvm alias default 22 +``` + +### 内存不足 + +OpenClaw Gateway 本身占用很小（约 50-100MB），但如果你同时运行 Ollama 等本地模型，建议至少 4GB 内存。 + +--- + +## 完整配置参考 + +```json +{ + "mode": "local", + "tools": { + "profile": "full", + "sessions": { + "visibility": "all" + } + }, + "gateway": { + "port": 18789, + "bind": "lan", + "mode": "local", + "auth": { + "mode": "token", + "token": "your-secret-token" + } + }, + "models": { + "providers": { + "deepseek": { + "baseUrl": "https://api.deepseek.com/v1", + "apiKey": "sk-xxxx", + "models": [ + { "id": "deepseek-chat", "name": "DeepSeek V3" }, + { "id": "deepseek-reasoner", "name": "DeepSeek R1" } + ] + } + } + }, + "agents": { + "defaults": { + "model": { + "primary": "deepseek/deepseek-chat" + } + } + } +} +``` + +--- + +## 一键部署脚本参考 + +不想记那么多命令？保存以下脚本到服务器，一键搞定： + +```bash +#!/bin/bash +set -e + +echo "==========================================" +echo " OpenClaw 一键部署脚本" +echo "==========================================" + +# 检查 Node.js +if ! command -v node &> /dev/null || [ "$(node -v | sed 's/v//' | cut -d. -f1)" -lt 18 ]; then + echo "📦 安装 Node.js 22..." + curl -fsSL https://deb.nodesource.com/setup_22.x | sudo -E bash - + sudo apt-get install -y nodejs +fi +echo "✅ Node.js $(node -v)" + +# 安装 OpenClaw +echo "📦 安装 OpenClaw..." +npm install -g @qingchencloud/openclaw-zh --registry https://registry.npmmirror.com +echo "✅ OpenClaw $(openclaw --version)" + +# 初始化配置 +mkdir -p ~/.openclaw +if [ ! -f ~/.openclaw/openclaw.json ]; then + echo "📝 写入默认配置..." + cat > ~/.openclaw/openclaw.json << 'CONF' +{ + "mode": "local", + "tools": { "profile": "full", "sessions": { "visibility": "all" } }, + "gateway": { "port": 18789, "bind": "lan", "auth": {} }, + "models": { "providers": {} } +} +CONF +fi + +# 创建 systemd 服务 +echo "⚙️ 配置开机自启..." +sudo tee /etc/systemd/system/openclaw.service > /dev/null << SVCEOF +[Unit] +Description=OpenClaw Gateway +After=network.target + +[Service] +Type=simple +User=$USER +Environment=PATH=$(dirname $(which node)):$PATH +ExecStart=$(which openclaw) gateway start +Restart=on-failure +RestartSec=5 +WorkingDirectory=$HOME + +[Install] +WantedBy=multi-user.target +SVCEOF + +sudo systemctl daemon-reload +sudo systemctl enable openclaw +sudo systemctl start openclaw + +echo "" +echo "==========================================" +echo " ✅ 部署完成！" +echo "==========================================" +echo "" +echo " Gateway 地址: http://$(hostname -I | awk '{print $1}'):18789" +echo "" +echo " 管理命令:" +echo " sudo systemctl status openclaw # 查看状态" +echo " sudo systemctl restart openclaw # 重启" +echo " journalctl -u openclaw -f # 查看日志" +echo "" +echo " 下一步:" +echo " 1. 编辑 ~/.openclaw/openclaw.json 添加你的模型 API Key" +echo " 2. sudo systemctl restart openclaw" +echo " 3. 用 ClawPanel 或 ClawApp 连接 Gateway" +echo "" +``` + +保存为 `deploy.sh`，然后 `chmod +x deploy.sh && ./deploy.sh`。 diff --git a/scripts/linux-deploy.sh b/scripts/linux-deploy.sh new file mode 100644 index 0000000..07f5b5f --- /dev/null +++ b/scripts/linux-deploy.sh @@ -0,0 +1,239 @@ +#!/bin/bash +set -e + +echo "==========================================" +echo " OpenClaw 一键部署脚本" +echo "==========================================" +echo "" + +# 检测系统 +detect_os() { + if [ -f /etc/os-release ]; then + . /etc/os-release + OS=$ID + OS_LIKE=$ID_LIKE + elif [ -f /etc/redhat-release ]; then + OS="centos" + else + OS=$(uname -s | tr '[:upper:]' '[:lower:]') + fi + echo "🖥️ 系统: $OS $(uname -m)" +} + +# 安装 Node.js +install_node() { + if command -v node &> /dev/null; then + local node_major=$(node -v | sed 's/v//' | cut -d. -f1) + if [ "$node_major" -ge 18 ]; then + echo "✅ Node.js $(node -v) 已安装" + return 0 + else + echo "⚠️ Node.js 版本过低 ($(node -v))，需要 >= 18" + fi + fi + + echo "📦 安装 Node.js 22..." + + case "$OS" in + ubuntu|debian|linuxmint|pop) + curl -fsSL https://deb.nodesource.com/setup_22.x | sudo -E bash - + sudo apt-get install -y nodejs + ;; + centos|rhel|fedora|rocky|alma|opencloudos) + curl -fsSL https://rpm.nodesource.com/setup_22.x | sudo bash - + sudo yum install -y nodejs || sudo dnf install -y nodejs + ;; + alpine) + sudo apk add nodejs npm + ;; + arch|manjaro) + sudo pacman -S --noconfirm nodejs npm + ;; + *) + # 通用方式：使用 nvm + echo "🔧 未识别的发行版，使用 nvm 安装..." + if ! command -v nvm &> /dev/null; then + curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.40.3/install.sh | bash + export NVM_DIR="$HOME/.nvm" + [ -s "$NVM_DIR/nvm.sh" ] && . "$NVM_DIR/nvm.sh" + fi + nvm install 22 + nvm alias default 22 + ;; + esac + + echo "✅ Node.js $(node -v) 安装成功" +} + +# 安装 OpenClaw +install_openclaw() { + echo "📦 安装 OpenClaw 汉化版..." + + # 检查是否需要修复 npm 权限 + local npm_prefix=$(npm config get prefix 2>/dev/null || echo "/usr/local") + if [ ! -w "$npm_prefix/lib" ] 2>/dev/null; then + # 无写入权限，使用用户目录 + if [ "$(id -u)" -ne 0 ]; then + echo "🔧 配置 npm 用户目录..." + mkdir -p ~/.npm-global + npm config set prefix '~/.npm-global' + export PATH=~/.npm-global/bin:$PATH + if ! grep -q '.npm-global/bin' ~/.bashrc 2>/dev/null; then + echo 'export PATH=~/.npm-global/bin:$PATH' >> ~/.bashrc + fi + fi + fi + + npm install -g @qingchencloud/openclaw-zh --registry https://registry.npmmirror.com + + # 验证 + if command -v openclaw &> /dev/null; then + echo "✅ OpenClaw $(openclaw --version) 安装成功" + else + echo "❌ openclaw 命令未找到，请检查 PATH" + echo " 尝试: source ~/.bashrc && openclaw --version" + exit 1 + fi +} + +# 初始化配置 +init_config() { + mkdir -p ~/.openclaw + + if [ -f ~/.openclaw/openclaw.json ]; then + echo "✅ 配置文件已存在，跳过初始化" + return 0 + fi + + echo "📝 写入默认配置..." + cat > ~/.openclaw/openclaw.json << 'EOF' +{ + "mode": "local", + "tools": { + "profile": "full", + "sessions": { + "visibility": "all" + } + }, + "gateway": { + "port": 18789, + "bind": "lan", + "auth": {} + }, + "models": { + "providers": {} + } +} +EOF + + echo "✅ 配置已写入 ~/.openclaw/openclaw.json" +} + +# 安装 systemd 服务 +install_service() { + # 检查 systemd 是否可用 + if ! command -v systemctl &> /dev/null; then + echo "⚠️ systemd 不可用，使用 nohup 后台启动..." + nohup openclaw gateway start > ~/.openclaw/gateway.log 2>&1 & + echo $! > ~/.openclaw/gateway.pid + echo "✅ Gateway 已后台启动 (PID: $(cat ~/.openclaw/gateway.pid))" + return 0 + fi + + echo "⚙️ 配置 systemd 服务..." + + local node_path=$(dirname $(which node)) + local openclaw_path=$(which openclaw) + + sudo tee /etc/systemd/system/openclaw.service > /dev/null << SVCEOF +[Unit] +Description=OpenClaw Gateway +After=network.target + +[Service] +Type=simple +User=$USER +Environment=PATH=$node_path:/usr/local/bin:/usr/bin:/bin +ExecStart=$openclaw_path gateway start +Restart=on-failure +RestartSec=5 +WorkingDirectory=$HOME + +[Install] +WantedBy=multi-user.target +SVCEOF + + sudo systemctl daemon-reload + sudo systemctl enable openclaw + sudo systemctl start openclaw + + # 等待启动 + sleep 3 + if sudo systemctl is-active --quiet openclaw; then + echo "✅ Gateway 服务已启动并设为开机自启" + else + echo "⚠️ Gateway 服务可能未启动，请检查: journalctl -u openclaw -n 20" + fi +} + +# 获取服务器 IP +get_server_ip() { + local ip=$(hostname -I 2>/dev/null | awk '{print $1}') + if [ -z "$ip" ]; then + ip=$(ip route get 1 2>/dev/null | awk '{print $7; exit}') + fi + if [ -z "$ip" ]; then + ip="localhost" + fi + echo "$ip" +} + +# 主流程 +main() { + detect_os + echo "" + + install_node + echo "" + + install_openclaw + echo "" + + init_config + echo "" + + install_service + echo "" + + local server_ip=$(get_server_ip) + local port=$(grep -o '"port":[[:space:]]*[0-9]*' ~/.openclaw/openclaw.json 2>/dev/null | head -1 | grep -o '[0-9]*' || echo "18789") + + echo "==========================================" + echo " ✅ 部署完成！" + echo "==========================================" + echo "" + echo " Gateway 地址: http://${server_ip}:${port}" + echo "" + echo " 管理命令:" + if command -v systemctl &> /dev/null; then + echo " sudo systemctl status openclaw # 查看状态" + echo " sudo systemctl restart openclaw # 重启" + echo " journalctl -u openclaw -f # 查看日志" + else + echo " cat ~/.openclaw/gateway.pid # 查看 PID" + echo " tail -f ~/.openclaw/gateway.log # 查看日志" + echo " kill \$(cat ~/.openclaw/gateway.pid) # 停止" + fi + echo "" + echo " 下一步:" + echo " 1. 编辑 ~/.openclaw/openclaw.json 添加模型 API Key" + if command -v systemctl &> /dev/null; then + echo " 2. sudo systemctl restart openclaw" + else + echo " 2. 重启 Gateway" + fi + echo " 3. 用 ClawPanel 或 ClawApp 连接管理" + echo "" +} + +main "$@"